This 2-channel module is easy to use and brings brilliant and fast results for all model ranges. The main application covers the use of an ACL or BEACON light, NAV lights with or without strobe function, and switchable landing lights.
Dynamic nicer, faster and sharper defined light effects
Dimensions reduced size and weight, optimized for 2-channel applications
Safety basic short cut protection, cut off and automatic restore
Battery deep discharge protection for connected Lipos
Master-Slave Operation no switch in power circuit necessary, activation by the receiver channel
Scale now with B.2 module soft transition selectable
Sport Navigation and strobe special function for many sport applications
receiver voltage 4.8-9.6V
weight ~3g, without wire
dimension 45x22x6mm
load per channel 1.5A to 16V (3A peak)
total load up to 3A
galvanically isolated circuits
operation without RC possible
15 effects with variable speed
short circuit protection
deep discharge protection
Slow Signals - a soft transition simulates a soft glow-on and glow-off like an old glow bulb or simulates a rotating beacon effect of slow blinking functions.
Fast Signals - during strobe sequences a basic level of around 20% power is given to the light. With these function a strong strobe light can be operated as navigation light AND at the same time be a strobe signal. Perfectly usable on sport models: one light, two functions!
$34.99
Delivers fast and brilliant results for all ranges of modelling and was massively improved in all areas of operation. With the four functions: strobe, beacon/ACL, navigation and spotlights - all controllable over one servo channel - it is perfectly usable for nearly each aircraft.
Dynamic nicer, faster and sharper defined light effects
Variety more light patterns pre-programmed
Dimensions reduced size and weight, polarity correct output sockets
Safety basic shortcut protection, cut off and automatic restore
Power up to 5 ampere per channel, 8 ampere combined
Battery deep discharge protection for connected Lipos
Master-Slave activation by the receiver power
Scale soft transition as special function selectable
Sport navigation with strobe function for many sport applications
Future new hardware platform allows future updates
Slow Signals a soft transition simulates a soft glow-on and glow-off like an old glow bulb or simulates a rotating beacon effect of slow blinking functions.
Fast Signals during strobe sequences a basic level of around 20% power is given to the light. With these function a strong strobe light can be operated as navigation light AND at the same time be a strobe signal. Perfectly usable on sport models: one light, two function
receiver side 4.8-9.6V
weight ~8g, without wire
dimension 50x35x6mm
load per channel 5A to 16V (>6A peak)
total load up to 8A
galvanically isolated circuits
operation without RC possible
15+1 classic effects with variable speed
15+1 modern effects with variable speed
15+1 special effects with variable speed
soft transition programmable
sport-nav mode programmable
short circuit protection
deep discharge protection
reverse polarity protection
simple servo output for dropouts, switches or valves
quick-snap mounting brackets included
$49.99
The 8-Channel Module offers universal use for all lighting tasks in functional model-making. Up to 8 electrical- and lighting circuits can be implemented and thereby, two different operating voltages can be used. Via a Windows PC, you can program the module with our software per USB. For each channel five freely programmable light sequences are programmable, which can be selected via servo travel from -100% to +100%. Additionally, the speed of the light effect can be configured on the module depending on personal taste and on the scale of the model.
Control side receiver 4.8-9.6V
Only ca. 18g (without cable)
Dimension: 50x60x8mm
Light signals 8 Channels with 3A to 30V, pulse load up to 5A
Total load up to 2x5A
Galvanically isolated circuits
Operation possible without RC signal
Smooth shifting programmable
Freely programmable effects sequences
2 programmable servo outputs for landing lights, undercarriage or fireworks
2 permanent and 5 freely programmable light sequences for selection, all with variable speed
Freely available Windows configuration software
Assistance function for production of standard light signals
Storing and exchanging of profiles
$99.99
Afterburner-Simulation with unmatched performance!
The 2-Channel Afterburner Module is especially designed for very powerful afterburner rings. It generates typical "flickering" effects in addition to even more functions.
Like all uniLIGHT modules, the function selection is made via servo travel and via parts of it respectively. The receiver selects the performance and additionally, the speed of the effect can be
selected wth the button.
Functions for MAIN
This is the main channel for the afterburner ring. The contacts are provided twice and internally switched in parallel to carry the required current. Switch the
contacts ALWAYS ONLY in parallel by connecting both cables of the ring homopolar. The main channel will then simulate the afterburner function.
Functions for BOOST
The second channel can be used for another functional enhancement (boost) and is being patched in in the top sector of the servo travel. This means that a second
afterburner ring can be patched in. In addition, a pump can be triggered to inject smoke or fluid.
$34.99