May be painted. Outer dimensions:

1/2 scale 60 x 24mm

40% 48 x 19mm

1/3 scale 39 x 16mm

1/4 scale 30 x 12mm

1/5 scale 24 x 9mm

1/6 scale 19 x 7mm

May be painted.

1/2 scale - 12in / 30cm

1/3 scale - 8in / 20cm

1/4 scale  - 6in / 15cm

1/5 scale - 4.75in / 12cm

1/6 scale - 4in / 10cm

May be painted. 

May be painted. 

May be painted.

May be painted.

May be painted.

1/2 scale - 9.5in / 24cm vertical height

1/3 scale - 7in / 18cm vertical height

1/4 scale - 4.75in / 12cm vertical height

1/5 scale - 4in / 10cm vertical height

1/6 scale - 3.5in / 9cm vertical height

Not functional. Use only for scale appearance. Includes two latches.

May be painted. Includes a set of four latches. Not functional, just for display purposes.

May be painted.

May be painted. Includes four individual pieces as shown in the picture.

May be painted.

May be painted.

Indicated by red arrow in other picture. May be painted. Items other than the inspection rings are not included.

Diameter:

1/5 scale - 23mm or 9/10in

1/4 scale - 29mm or 1-5/32in

1/3 scale - 39mm or 1-1/2in

May be painted. Outer dimensions:

1/2 scale 114 x 48mm

40% 91 x 38mm

1/3 scale 75 x 32mm

1/4 scale 57 x 24

1/5 scale 46 x 19mm

1/6 scale 37 x 15mm

Please use the Contact Form for custom sizes.

Kit requires finishing and painting. Kit does not include mirror face (use covering or aluminum foil to imitate mirror face).

May be painted.

This radiator panel is laser cut, made to order, and can be made in any requested dimension. IFlyTailies will verify the requested dimensions. May be painted.

The 1/3 scale version fits the Hangar 9 Decathlon

May be sanded, cut, and painted. May be glued together with other pieces. Two sizes available:

5in x 3-1/2in. / 127mm x 88mm

7in x 4-8/10in. / 178mm x 122mm

Use the Contact Form if interested in another size.

Items other than the radiator panel are not included. Other pictures show radiator panel installed in a customer's aircraft.

Customer comment:

"I wanted to get back to you on the radiator material you printed for me for the Fokker. I now have close to 20 flights with this material installed. I had also put in a new gas engine as well. I am experiencing no cooling issues, and the material is holding up perfectly (no cracks, melting etc.). One section is in very close proximity to the engine cylinder, and I was a little concerned about melting, but have not had any issues yet. I found the best way to cut is was with my table saw. This allowed me to get a very accurate, clean miter cut."

May be painted.

Made from plastic. May be sanded, cut, and painted. May be glued together with other pieces. Comes in white. Two overall sizes available:

Version A: approx. 13-1/4in (l) x 3in (w) x 2-1/4in (h) / 339mm (l) x 77mm (w) x 58mm (h)

Version B: approx. 10-1/4in (l) x 2-5/16in (w) x 1-5/8in (h) / 260mm (l) x 59mm (w) x 42mm (h)

Use the Contact Form if interested in another size.

Items other than the turbo charger are not included. This item will require extensive finishing to achieve a smooth finish. Comes in a set of two turbo chargers.

May be painted. Height:

1/2 scale 5.2in / 132mm

40% 4.13in / 105mm

1/3 scale 3.43in / 87mm

1/4 scale 2.6in / 66mm

1/5 scale 2.01in / 53mm

1/6 scale 1.65in / 42mm

May be painted. Height:

1/2 scale 3.46in / 88mm

40% 2.8in / 71mm

1/3 scale 2.28in / 58mm

1/4 scale 1.73in / 44mm

1/5 scale 1.38in / 35mm

1/6 scale 1.1in / 28mm

May be painted.

Diameters:

1/2 scale: 1in / 25.4mm 

1/2.5 scale: 0.8in / 20.3mm

1/3 scale: 0.66in / 16.8mm

1/4 scale: 0.5in / 12.7mm

1/5 scale: 0.4in / 10.2mm

1/6 scale: 0.32in / 8.1mm 

1/8 scale: 0.25in / 6.4mm